Preis: CHF 1675.00
SwashPlate both are 120º with 6 servos for Gyro VBar NEO or (Mission Planner) Differential Collective Pitch (DCP) drive system . Front spindle forward tilt 9ﾟ and rear spindle forward tilt 4ﾟ with transmission shaft design. Low noise, low pollution, simple maintenance, pass through severe test, we take care the precision of part connect with part. The rotor head is a triple grips design. May let you enjoy the superior performance - stability, agility, and better hover lift. Feature: A stable platform and it's easier assembly and maintenance less. A good choice and durable enough to be a training model. Tandem helicopter brings you fun of aerial photography and transportation as well. 1. Differential Collective Pitch (DCP) drive system design. 2. Two rotor disk increasing lift and smooth control. a. Thrust axis (thrust up and down). b. Pitch axis (forward and aft cyclic). c. Roll axis (lateral cyclic). d. Yaw (directional control). 3. Single motor drive two main shafts.; 4. Precision CNC metal rotor head perform smooth. 5. One-piece forming frames simplify installation and maintenance. 6. NYGF main blade is toughness, safety & more lift, good to be training blade. 7. SwashPlate both are 120º with 6 servos for Gyro VBar NEO or (Mission Planner) Specification: Total Overall Length(with Fuselage) : 880mm Overall Height: 250mm Overall Width: 350mm Main rotor blades: 400 ~ 430mm Main Main Rotor Diameter: 960 ~ 1020mm Motor Drive Gear: 12T (for 5.0mm shaft) Main Drive Gear : 12T: 47T & 12T : 40T Kit weight: 3600g Flying weight pprox.: 4700g Power System(Recommended): Brushless Motor(1360 kv) ESC 80-120A ESC Li – Po Battery 6S1P (22.2v /5200mah) Gear Ratio: 1: 13.06 If you are interested in autopilot flight, please refer to the relevant settings. https://ardupilot.org/copter/docs/dual-helicopter.html Package Content: 1. Tandem-5 Standard Kits 1/set 2. Main Blade x 3 pairs 3. CH-47D Scale fuselage 1:16 x 1 set 4. Velcro tape x 2 with servos screw 5. Instruction Manual Electronic Equipment Required: Transmitter(7-channel or more, helicopter system) Receiver(7-channel or more) Mini Servo x 6 pcs 6S Li-Po 5000mAh x 1 Brushless Motor 1360 kv 80~120A Brushless ESC x 1 Flybarless system Gyro x 1 set (recommend VBar NEO ) Autopilot ( Mission Planner ) pixhawk etc. UBEC 10A x 1 Advice: Based on Safety demand, if this is your first experience to build a model helicopter, please work with experienced pilot to help your assembly and data setting job. A safe flight is your liability. Please read through this instruction manual carefully and observe the related instruction without fail.
TANDEM-5_A - CH-47D RC Helicopter for 6 servos bei Swiss Scale Helikopter
Ihr Schweizer Spezialist für RC-Modellhelikopter, Turbinen und Zubehör.
Telefon: +41 79 401 04 00
E-Mail: info@swiss-scale-helikopter.ch
Website: swiss-scale-helikopter.ch